Culni homeCheck my home
Menu

Batteries and backup

How a home battery earns its keep every day and what it can and cannot run when the grid is down.

An enamel picture of a stone water tower on a hill above a small town, a few lit windows below it at dusk.

A home battery serves two masters. On ordinary days it can move energy from cheap hours to expensive ones; on storm days it is the reserve that keeps chosen circuits running. Every setting is a trade between the two, and the articles in this section make those trades explicit.

What this section covers

  • Grid charging: when charging a battery from the grid at off-peak prices pays after round-trip losses and wear, and when it does not.
  • Reserve settings: what share of the battery to hold back on ordinary days and before a forecast storm, and what that costs in daily value.
  • Whole-home or partial backup: what a battery can actually run, why motor loads and start-up surges matter, and how the backup panel is wired.
  • Warranties: throughput, cycle counts and end-of-warranty capacity, and what daily cycling uses up.
  • Virtual power plants: what programs pay batteries for event days and what control the homeowner gives up in return.

How to use these articles

Pair them with the battery arbitrage calculator and the backup runtime calculator, and keep the home battery checklist for the questions to ask an installer. The battery scheduling and backup reserve pages explain how Culni sets the daily plan and the reserve.

Backup is always described as hours for the loads you list, at the reserve you choose, and it depends on the hardware and how it was installed. Worked examples are labeled fictional.

TodayYour turn

Send your rate and your devices

Your utility and rate plan, one recent bill and the devices you have or plan. We reply with a written home energy plan: your rate decoded, which devices can connect, the daily schedule and its estimated value with every assumption shown.

Remote. No site visit needed.