8 to 11 a.m.
5 to 9 p.m.
in the example home
Battery arbitrage calculator
The value of storing cheap energy and using it at the peak, after losses and your reserve.
- 8 a.m. to 11 a.m. charges from solar
- 5 p.m. to 9 p.m. runs the house
- You enter
- Usable kWh, reserve, efficiency, peak-hour use, two prices, peak days
- You get
- Value per peak day, per month and per year
- Defaults
- 13.5 kWh, 20% reserve, NREL's representative 85%
- Leaves out
- Battery cost, wear and program payments

Calculator
Arbitrage here means charging a battery with cheap energy and using it to avoid buying expensive energy later. On a time-of-use rate, that is most of what a battery does for the bill on an ordinary day. This calculator shows what one daily cycle is worth after the two things that always shrink it: the reserve you keep for outages and the energy lost on the way in and out.
What each input means and where to find it
| Input | What it means | Where to find it |
|---|---|---|
| Usable battery capacity | kWh the battery can actually deliver | The specification sheet or the app. Use usable, not total, capacity |
| Backup reserve kept | Share of the battery held for outages and never spent for savings | The reserve setting in the battery app |
| Round-trip efficiency | Share of the energy put in that comes back out | The specification sheet. NREL’s 2024 Annual Technology Baseline uses 85% as a representative value for home batteries |
| Price avoided at peak | Energy charge per kWh in the peak window | Your rate schedule |
| Cost of the charging energy | What the stored energy cost you | Charging from solar: the export credit you give up. Charging from the grid: your off-peak price |
| Peak days per month | Days the peak price applies | Usually weekdays, about 22 a month |
The formula in plain words
- Energy delivered at peak = usable capacity × (1 minus reserve), or the home’s peak-hour use not covered by solar if that is smaller.
- Energy needed to charge it = energy delivered ÷ round-trip efficiency.
- Value per peak day = energy delivered × peak price, minus energy needed × cost of the charging energy.
- Value per month = value per peak day × peak days; value per year = the monthly value × 12.
Example (fictional). The calculator opens with the fictional example home’s battery: 13.5 kWh usable, a 20% reserve and 85% round-trip efficiency. On the fictional example rate, it avoids the 31 cent peak and charges from surplus solar that would otherwise earn the 7 cent export credit, on 22 peak days a month. It delivers 10.8 kWh at the peak and needs 12.7 kWh to charge. That is worth $2.46 per peak day, $54.09 per month, and $649.07 per year if every month matched this one. Charged from the grid at the 8 cent off-peak price instead, it is worth $2.33 per peak day.
How to read the result
The value per peak day is the most reliable line. The default peak-hour use (10.8 kWh) lets the battery deliver everything above its reserve, so check that input first: enter the energy your house buys in peak hours today that solar does not cover. On the example home’s clear April weekday, the scheduled battery ran the house from 5 to 9 p.m. and still ended the peak with 5.7 kWh stored, above its 2.7 kWh reserve, because the house did not need more in those hours. If your peak-hour use is smaller than the battery’s share above the reserve, the calculator now limits the delivered energy to it.
The yearly line multiplies one month by 12. Peak windows change by season, winter can bring two peaks a day, and cloudy weeks leave less surplus solar to store.
For a Kentucky comparison, enter LG&E’s RTOD-Energy on-peak charge of $0.19307 per kWh (effective September 1, 2026, a base energy charge before riders and taxes) and the NMS-2 export credit of $0.07089 per kWh (tariff Sheet No. 58, effective February 16, 2026). The value falls to $1.18 per peak day, before the limits above. RTOD-Energy’s summer on-peak block is also short: 1 to 5 p.m. on weekdays in Eastern Standard Time.
Limits
- Before costs. Battery price, wear and any utility program payments are not included.
- Grid charging only where allowed. Some batteries and interconnection agreements do not permit charging from the grid. Check before using the off-peak price.
- Net metering changes the charging cost. Under kWh-for-kWh net metering, such as Kentucky’s NMS-1, exported solar earns a retail-valued credit, so storing it saves much less.
- Power limits. A 5 kW battery cannot deliver more than 5 kWh in any one hour, whatever the price.
- Programs take priority. LG&E and KU list a Bring Your Own Battery pilot as “coming soon”. If you join any battery program, the utility’s event instructions override the schedule on event days. Culni is not affiliated with LG&E, KU or any program.
What to do next
Check how much backup the reserve leaves with the backup runtime calculator, and compare storing solar with exporting it in the solar self-consumption calculator. If you are still choosing a battery, the home battery checklist lists the questions to ask.
Culni’s battery scheduling decides hour by hour when the battery charges, holds and discharges, and never schedules below the reserve you set in backup reserve. The battery homes page covers solar plus storage and storage alone. To see what your battery could do on your rate, check my home.
TodayYour turn
Send your rate and your devices
Your utility and rate plan, one recent bill and the devices you have or plan. We reply with a written home energy plan: your rate decoded, which devices can connect, the daily schedule and its estimated value with every assumption shown.
Remote. No site visit needed.