How it works
Six steps from your rate plan and a recent bill to a daily schedule that is checked against each bill.
- You send
- Rate plan, a recent bill, your devices and your goals
- You get first
- A written home energy plan to read before anything runs
- Then
- A daily schedule and a monthly bill check
- Stays with you
- Your reserve, your comfort limits and every permission

Culni works remotely, in six steps: Send, Decode, Connect, Run, Check and Adjust. You start with what you already have: your rate plan, a recent bill and a list of your devices. Culni reads the rate and writes a plan you can check before anything runs. Then the schedule runs every day and is compared with every bill. Nothing needs a site visit, and nothing changes in your home until you have read the plan and given permission.
The six steps at a glance
| Step | What you do | What Culni does | What comes out |
|---|---|---|---|
| 1. Send | Send your rate plan, a recent bill, your devices and your goals | Reads it all and asks for anything missing | A complete starting file |
| 2. Decode | Read the plan, ask questions, decide | Reads the rate and writes the plan | The written home energy plan |
| 3. Connect | Give permission, device by device | Checks each control path in your home | A connection table: connected, read-only or manual |
| 4. Run | Live as usual and mention trips or changes | Writes the next day’s schedule each evening | A daily schedule your devices follow |
| 5. Check | Send each month’s bill | Compares the estimate with the bill | A monthly bill check with each difference explained |
| 6. Adjust | Say when the home changes | Rewrites the schedule and the estimate | An updated plan |
Step 1: Send
What you do. Send your utility’s name and the rate plan shown on your bill, at least one recent bill (a PDF or a clear photo; up to twelve months helps with seasons) and the devices you have or are planning: solar inverter, home battery, EV and charger, thermostat, water heater and electrical panel, with makes and models where you know them. Say what you want most: lower bills, backup during outages, or both, and which loads matter in an outage. If you drive an EV, add your typical daily miles and departure times. If you are an LG&E or KU customer with solar, say whether you are on net metering service NMS-1 or NMS-2; the Louisville, Kentucky page explains the difference.
What Culni does. Reads what you sent and asks for anything missing, such as a bill page that shows the rate name, or the usable capacity of a battery.
What comes out. A complete starting file. The utility bill checklist and the home energy inventory worksheet help you gather it, and the contact page is where you send it.
Step 2: Decode
What you do. Read the plan and ask questions. Then decide whether to go ahead, change something or stop there. The plan is yours either way.
What Culni does. Reads your rate schedule: price windows by season and day type, weekends and holidays, the fixed daily charge, the export credit for solar you send to the grid, and rules on who may join a rate (some time-of-day rates need a particular meter or have a cap on customers). Where you have a choice of rates, it compares them for your home, including the case where a time-of-day rate would cost you more. Then it writes the home energy plan.
What comes out. The written plan: your rate decoded, a device-by-device connection table, an hour-by-hour schedule for each day type, your backup reserve and the hours it gives for the loads you list, the estimated value with every input shown, and the utility programs that apply, with what Culni would and would not do on event days. The rate engine page explains the decoding, and the example home shows one day of a schedule, hour by hour.
Step 3: Connect
What you do. Give permission device by device. You decide which devices Culni may read and which it may send instructions to.
What Culni does. Checks each device’s control path in your home. Depending on the device, that may be the manufacturer’s cloud interface, a local network interface or another route the device offers. Culni reads first, then confirms that a harmless instruction arrives, for example moving a charging start time and moving it back. Anything that cannot connect is listed as manual, with the settings for you to enter by hand.
What comes out. An updated connection table with one status per device. The devices page explains the device categories, the control paths and what “manual” means.
Step 4: Run
What you do. Live as usual. Mention anything unusual that is coming: a trip, guests, a car that will stay home all week. You keep each device’s own app and can change a setting there whenever you want.
What Culni does. Each evening it writes the next day’s schedule from your rate, the solar forecast, your household pattern, departure times and your reserve, and sends it to the connected devices. It adjusts for weather (a cloudy day changes how much the battery can store from solar), for departures (the car is ready by the time you set) and for storm watches (the reserve can rise before a forecast storm; see backup reserve). If you join a utility program, the utility’s instructions take priority on event days.
What comes out. One daily schedule across your battery, EV charging and flexible loads such as a heat pump water heater or a pool pump, never below the reserve you chose.
Step 5: Check
What you do. Send each month’s bill when it arrives. Where your utility offers a usage download (often under the Green Button name), that helps too.
What Culni does. Compares the month’s estimate with the actual bill. When they differ, it says why: weather, more or less use, a rate or rider change, a program event, or a device that did not follow the schedule.
What comes out. A monthly bill check: estimated against actual, what moved, and what changed in the schedule as a result. The bill is always the record; the estimate is checked against it, not the other way around.
Step 6: Adjust
What you do. Say when the home changes: a new battery, a second EV, a heat pump water heater, a new work schedule, a move to a different rate.
What Culni does. Rewrites the schedule and the estimate. Rates change more often than many people expect. LG&E’s base rates changed under a Kentucky Public Service Commission order effective February 16, 2026, and its rate sheets were revised again effective September 1, 2026. When the rate behind your plan changes, the plan changes with it.
What comes out. An updated plan that says what changed and why.
Who does what
| Task | Who |
|---|---|
| Choosing a rate and applying for it | You decide, the utility decides eligibility, Culni compares the options |
| Choosing the backup reserve | You; Culni never schedules below it |
| Daily timing of the battery, car charging and flexible loads | Culni, through control paths confirmed for your home |
| Wiring, breakers, inverter protection settings and export limits | Your installer or electrician, under the utility’s interconnection rules |
| Program enrollment and event days | You and the utility |
| The bill | The utility issues it; Culni checks it |
| Hardware warranty and repairs | The manufacturer and your installer |
If you are an installer or electrician, the installers page explains where Culni picks up after commissioning.
What Culni never touches
- Wiring, breakers, the electrical panel and any transfer equipment.
- Inverter protection settings, grid-support settings and export limits set for your interconnection agreement.
- Your interconnection agreement, net metering enrollment or utility account.
- The battery below the reserve you chose.
- Devices you have not approved, and any device after you withdraw permission.
- Utility program enrollment. Culni is not affiliated with any utility and cannot enroll you.
- Hardware sales and installation, and tax or legal advice.
What Culni reads, what it controls and how to take your data with you are on security and data.
TodayYour turn
Send your rate and your devices
Your utility and rate plan, one recent bill and the devices you have or plan. We reply with a written home energy plan: your rate decoded, which devices can connect, the daily schedule and its estimated value with every assumption shown.
Remote. No site visit needed.