Your home energy plan
The written plan you read before anything runs: your rate decoded, your devices, your schedule, your estimate.
- You send
- Rate plan, one to twelve bills, devices, routines, goals
- You get
- A written plan in six sections
- Every estimate
- Shown next to its inputs and their dates
- Nothing runs
- Until you have read the plan and given permission

The home energy plan is the first thing Culni gives you. It is a written document, built from your rate, your bills and your devices, that says what a daily schedule would do in your home, why, and what it is likely to be worth. You read it before anything is connected or runs. If you stop there, you still have your rate decoded and an estimate whose inputs you can check yourself.
What you provide
| What | Why it matters | Where to find it |
|---|---|---|
| Utility name and rate schedule | The rate decides most of what the schedule does | On your bill, usually beside the word “rate” |
| One to twelve recent bills | One bill shows the rate; a year of bills shows the seasons | PDFs from your utility account, or clear photos |
| Net metering status | Decides what exported solar earns (at LG&E and KU, NMS-1 or NMS-2) | Your interconnection paperwork, or the bill |
| Devices and models | Decides what can be scheduled and how | Nameplates, or the information screen in each device’s app |
| Weekday and weekend routines | When the house uses the most energy | You |
| EV miles and departure times | How much charging each night needs, and by when | You, or the car’s app |
| Backup needs and goals | How much of the battery to hold for outages, and what you care about most | You: the loads that matter and for how many hours |
The device list covers the solar inverter, home battery, EV and charger, thermostat, water heater and electrical panel. If you are still choosing equipment, send the models you are considering; the plan marks them as unconfirmed until they are installed. The utility bill checklist shows what to look for on a bill, and the home energy inventory worksheet puts the device list on one sheet.
You can cover the account number on a bill; the plan does not need it. Never send a password.
What the plan contains, section by section
1. Your rate, decoded
The rate on one page, in plain terms:
- Price windows by season and day type, in clock time.
- How weekends and holidays are treated.
- The fixed daily charge and the energy charges, with the effective date of the rate sheet they come from.
- The export credit for solar you send to the grid.
- Riders, listed and estimated rather than modeled to the cent, because many of them change from month to month.
- Who may join the rate: meter requirements and any cap on the number of customers.
- A rate comparison where you have a choice, including the honest downside: a time-of-day rate can raise a bill if use does not move out of the peak.
Clock time matters more than it sounds. LG&E and KU set their residential time-of-day windows in Eastern Standard Time all year, so the April to October on-peak window of 1 to 5 p.m. EST shows on a summer clock as 2 to 6 p.m. The plan writes every window in the time your clock shows. The rate engine page explains how a rate is read, and the rate plan comparison calculator lets you test a choice yourself.
2. The device connection table
Each device, the control path found for it, its status and what Culni would do with it. At the plan stage a path is marked “to confirm” until the Connect step tests it in your home. A device with no usable path is marked manual, and the plan gives you its settings to enter by hand.
Example (fictional). A connection table at the plan stage:
| Device | Control path | Status | What Culni would do |
|---|---|---|---|
| Solar inverter | Manufacturer cloud interface | To confirm, read-only | Read production to plan around the forecast |
| Home battery | Manufacturer cloud interface | To confirm | Charge, hold and discharge by the hour, above the reserve |
| EV charger | Local network interface | To confirm | Start charging off-peak, ready by the departure time |
| Water heater | None found | Manual | Give you a heating schedule to set by hand |
The devices page explains the categories and the control paths.
3. An hour-by-hour schedule for each day type
A schedule for every day type your rate and your routines create: for example a summer weekday, a winter weekday and a weekend day. Each block of hours has an instruction for each device and a one-line reason, such as “holding solar for the 4 p.m. peak” or “charging the car at 1 a.m., ready by 7:30 a.m.” The example home shows one day of such a schedule, hour by hour.
4. Your backup reserve and the hours it gives
You choose how much of the battery to hold for outages. The plan shows the hours of backup that reserve gives for the loads you list, and what a higher reserve costs in daily value, because energy held for an outage cannot also cover the evening peak.
Example (fictional). A 13.5 kWh battery with a 20% reserve holds 2.7 kWh. After about 5% inverter loss, roughly 2.6 kWh reaches the loads: about 7.8 hours for loads averaging 330 W. Try your own numbers in the backup runtime calculator.
Backup depends on how your system was installed: which circuits are backed up, and whether the battery can run them during an outage at all. The plan states what your installation allows and does not change it. More on backup reserve.
5. The estimated value, with every input shown
Before and after for each day type, then a monthly estimate. Next to every figure the plan lists its inputs: rate values and the date of the rate sheet, your usage profile, the solar estimate, battery size, round-trip efficiency (NREL’s representative 85% for home batteries, unless your battery’s documented figure is known), the reserve and EV miles. Every figure is an estimate. Actual results depend on weather, usage, rate changes and how your devices respond, which is why each month’s bill check compares the estimate with your actual bill.
6. Utility programs and event days
The programs that apply to your utility and devices, such as peak-time rebates, managed EV charging, thermostat programs and battery programs. For each one, the plan says what the program asks of your devices on event days, how that would interact with the schedule, what Culni would do (step aside on event days) and what it would not do (enroll you, or act for the utility). Culni is not affiliated with any utility or program, and joining one is your decision.
Also in the plan
- The settings for any manual device, ready to enter by hand.
- Open questions and the assumptions Culni had to make.
- What Culni will not touch in your home: wiring, inverter protection settings, export limits and anything covered by your interconnection agreement.
What the plan is not
It is not a hardware quote, an installation or wiring design, an engineering review of your system, tax or legal advice, or a promise of savings. Culni does not sell or install equipment, so the plan has nothing to sell you.
What happens next
If you decide to go ahead, the next step is Connect: you give permission device by device and each control path is checked in your home. The whole sequence is on how it works. To start, send your rate plan, a recent bill and your device list through the contact page.
TodayYour turn
Send your rate and your devices
Your utility and rate plan, one recent bill and the devices you have or plan. We reply with a written home energy plan: your rate decoded, which devices can connect, the daily schedule and its estimated value with every assumption shown.
Remote. No site visit needed.