Culni homeCheck my home
Menu

About Culni

A new company that starts every home with the electricity rate and shows its work.

Company
Culni Grid LLC
Office
118 East Main Street, Suite 210, Louisville, KY
Serves
Homes across the US, remotely
Does not
Sell hardware, take referral fees or give tax advice
A young seedling sprouts from a gap between old brick pavers at the foot of a cast-iron streetlamp.

Culni Grid LLC (“Culni”) is a new company with an office in Louisville, Kentucky. It writes software that reads a home’s electricity rate and runs one daily schedule across rooftop solar, a home battery, EV charging and flexible loads such as a water heater, heat pump or pool pump, then checks the result against the bill every month. In one line: one schedule for your solar, battery and EV, built from your electricity rate and checked against your bill.

A new company, said plainly

Culni is new. It has no customer results to point to and no track record to lean on. So instead of asking for trust, it shows its work. The example home is labeled fictional at the top and the bottom. Every estimate in a home energy plan lists its inputs and their dates. And every month the bill check compares the estimate with the bill your utility actually sent, so you can see for yourself whether the schedule is doing what the plan said.

Why start with the rate

Most home energy apps start with the hardware: a battery app runs the battery, a car app runs the car, and each is often set against a rate card entered by hand. Culni starts with the rate, for four reasons.

The rate decides most of the value. The same battery on two different rates gives two different answers. In Louisville, an LG&E customer on Rate RS pays an energy charge of $0.11499 per kWh, while solar exported under net metering service NMS-2 earns a bill credit of $0.07089 per kWh. So a kWh of solar used at home is worth about 4.4 cents more than the same kWh sent to the grid (base charges effective September 1, 2026, before riders and taxes). On LG&E’s optional time-of-day energy rate, on-peak energy costs $0.19307 per kWh and off-peak $0.09312. On base energy charges alone, that rate beats Rate RS only if less than about 22% of a home’s use falls in on-peak hours. Those numbers, not the hardware, decide what a schedule is worth.

Rates change. LG&E’s rates changed under a Kentucky Public Service Commission order effective February 16, 2026, and its rate sheets were revised again effective September 1, 2026. A rate card entered into an app by hand does not update itself. The rate engine reads the rate schedule itself and the plan changes when the rate does.

The bill is the check. Each device reports what it did. Only the bill says what it cost. Checking one against the other each month is how mistakes, rate changes and devices that stopped following the schedule get caught.

Equipment now carries its full cost. The federal tax credits for home solar and batteries, heat pumps, new EVs and home chargers have ended on the dates the IRS published (the FAQ lists them). Getting more value from equipment a household already owns matters more than it did.

Starting with the rate also means that the honest answer is sometimes “stay on your current rate” or “a schedule will not change much in this home”. The plan says so when it is true.

What Culni will not claim

  • Customers, reviews, results or average savings it does not have.
  • That it works with any particular brand. Device connection is confirmed home by home; see devices.
  • Certifications or compliance with any standard.
  • Affiliation with a utility or a utility program, or the ability to enroll you in one.
  • That a battery will run a whole house through any outage. The plan gives hours of backup for the loads you list, at the reserve you choose.
  • Prices, response times or promises it has not set.
  • Tax or legal advice.

How Culni stays on your side

Culni does not sell or install hardware, so the plan has nothing to sell you. It has no partnerships, referral fees or utility contracts. If that changes, this page will say so. Your data is yours and is not sold; see security and data.

Where Culni works

The office is at 118 East Main Street, Suite 210, Louisville, KY 40202. It is an office, not a showroom or a service depot. The work itself is remote, so Culni serves homes across the US, each on its own utility’s rate. The Louisville, Kentucky page has the office details and the Kentucky rate context.

Rate Notes

Culni publishes Rate Notes, written by the Culni Editorial Team: plain explanations of rates, bills, solar export credits, batteries, EV charging and utility programs, with primary sources linked.

To see what Culni would do in your home, start with how it works, or send your rate plan, a recent bill and your device list through the contact page.

TodayYour turn

Send your rate and your devices

Your utility and rate plan, one recent bill and the devices you have or plan. We reply with a written home energy plan: your rate decoded, which devices can connect, the daily schedule and its estimated value with every assumption shown.

Remote. No site visit needed.