Culni homeCheck my home
Menu

8 to 11 a.m.
5 to 9 p.m.

in the example home

Battery scheduling

When your battery charges, when it waits and when it runs the house, decided against your rate.

  • 8 a.m. to 11 a.m. charges from solar
  • 5 p.m. to 9 p.m. runs the house
You send
Battery model, usable kWh, power rating, current mode and reserve
You get
An hour-by-hour plan for each day type, with a reason for each block
Stays with you
The reserve level and whether grid charging is allowed
Limits
Only through a control path confirmed for your home
A rain barrel beside a house collects water from a downspout while its spigot stays closed and a watering can waits below.

A home battery can do three things in any hour: charge, wait or discharge. Which of the three is right depends on what electricity costs in that hour, what it will cost later today, how much sun is coming and how much backup you want held for an outage. Most batteries ship with a mode that answers the question the same way every day. Culni answers it hour by hour, from your actual rate.

What the default modes do

Battery apps usually offer a few modes. A self-use mode charges from surplus solar and discharges whenever the house needs more power than the panels supply. A backup-only mode keeps the battery full and waits for an outage. Some apps add a time-based mode that you set up yourself against a rate card.

Self-use is a sensible start, but it spends stored energy as soon as the sun drops, whether the next hour is cheap or expensive. On a time-of-use rate, energy that would have covered a 31 cent hour can end up covering an 8 cent hour, or the battery can be empty by the time the peak arrives.

How Culni decides

Each evening the schedule for the next day is written from four inputs:

  1. Your rate, decoded. The rate engine turns your rate schedule into price windows by season and day type, plus the export credit for energy you send to the grid.
  2. The solar forecast. How much surplus the panels are likely to produce, and when.
  3. Your household pattern. When the house uses the most energy, and when the car charges if you have one (see EV charging).
  4. Your reserve. The share of the battery you keep for outages. Culni never schedules below it. You choose it, and it can rise automatically before a storm (see backup reserve).

From those, every hour gets one of three instructions, with a reason you can read in the plan:

Instruction Typical reason
Charge Surplus solar would earn only the export credit, or (where allowed) off-peak grid energy is cheap enough to store
Hold The current price is lower than a price coming later today
Discharge This is the most expensive window of the day, and the reserve is still protected

Example (fictional). The example home has a 13.5 kWh battery (5 kW), 7.6 kW of solar and an example time-of-use rate: 8 cents off-peak (9 p.m. to 7 a.m.), 14 cents during the day and 31 cents at the 4 to 9 p.m. peak, with a 7 cent export credit. On a clear April weekday the battery charges from surplus solar from 8 a.m. until it is full at about 11 a.m. It then holds through the afternoon while the panels cover the house, and runs the house from 5 to 9 p.m. It ends the peak with 5.7 kWh, still above the 2.7 kWh reserve. With the battery left in self-use mode and the car charging on arrival, the same home buys 8.4 kWh at the peak price that day. With the schedule it buys none. Walk through every hour on the example home page.

Charging from solar or from the grid

Where surplus solar only earns an export credit that is lower than the price you pay later, storing it is usually worth more than sending it out. The solar export page explains how net metering and net billing change that math.

Charging from the grid is a different decision. Some batteries and some interconnection agreements allow it and some do not. When it is allowed and the off-peak price is well below the peak price, a top-up before the peak can pay for itself even after losses. NREL uses 85% as a representative round-trip efficiency for home batteries, so about 15% of the energy is lost on the way in and out. Culni includes that loss in every comparison and only schedules grid charging where your equipment and your agreement permit it. You can see the arithmetic in the battery arbitrage calculator.

Day types and seasons

A rate rarely has one shape all year. Many time-of-use plans move their peak windows between summer and winter, and some have two peaks on winter weekdays. LG&E and KU, for example, publish different on-peak hours for April to October and for the winter months. Weekends and holidays are often off-peak all day. Your plan has a schedule for each day type, so the battery is not discharging into a cheap Saturday afternoon because a weekday rule said so.

What Culni will not do

  • It will not drop the battery below your reserve for savings.
  • It will not change wiring, inverter protection settings or anything covered by your interconnection agreement. Those stay with your installer and your utility.
  • It will not promise a control path it has not confirmed. Before your schedule runs, the connection check confirms how your battery can receive instructions in your home. If it cannot, the plan says so and gives you the settings to enter by hand.
  • If you join a utility battery program, the utility’s event instructions take priority on event days, and your plan says what Culni does on those days.

What you send and what you get

Send the battery’s make and model, its usable capacity and power rating, the mode it runs in now and your current reserve. A screenshot of the app’s settings page is enough. With your rate and a recent bill, that is all the battery part of the plan needs.

You get an hour-by-hour plan for each day type, the reason for each block, the hours of backup your reserve gives for the loads you list, and the estimated value of the schedule with every assumption shown. Each month the bill check compares the estimate with your actual bill.

TodayYour turn

Send your rate and your devices

Your utility and rate plan, one recent bill and the devices you have or plan. We reply with a written home energy plan: your rate decoded, which devices can connect, the daily schedule and its estimated value with every assumption shown.

Remote. No site visit needed.