Culni homeCheck my home
Menu

Vehicle-to-home (V2H): can your EV power your house in an outage?

Vehicle-to-home charging lets some EVs run a house in an outage. See the equipment, standards and utility steps it needs, and how it compares with a battery.

Reader question
Which EVs can back up a house today, what equipment does vehicle-to-home need, and how does it compare with a home battery?
A saddled camel rests beside a desert tent at dusk while water from a skin on its saddle pours into a clay jar at the tent's door.

Yes, some electric vehicles can power a house during an outage, but only through home equipment that first disconnects the house from the grid and then turns the car’s battery into household AC power. GM’s vehicle-to-home (V2H) charging equipment supplies up to 9.6 kW to a properly equipped home from V2H-capable Chevrolet, GMC and Cadillac models of the 2026 and 2027 model years, and Ford has offered home backup for the F-150 Lightning through its own charger and home integration system. Compared with a home battery, a car often holds several times more energy, but it backs up the house only when it is parked at home and charged, and every kWh it gives the house is range it no longer has.

This article separates vehicle-to-load (V2L), vehicle-to-home and vehicle-to-grid (V2G), names the standards and utility steps that make V2H safe to connect, works out hours of backup for a car and a home battery on the same loads, and ends with a checklist. Product facts come from manufacturer and utility pages checked in November 2026. Where a live page refused automated requests, we cite a dated Wayback Machine capture and say so.

V2L, V2H and V2G: three different things

The three terms describe where the car’s energy goes: to appliances plugged into the car (V2L), into the home’s own wiring while the house is cut off from the grid (V2H), or back onto the utility’s lines (V2G). Each needs different equipment and a different level of permission from the utility.

Term Where the car’s energy goes Equipment at the house Utility involvement
V2L, vehicle-to-load Outlets on the vehicle, into cords and appliances None beyond cords rated for the load None
V2H, vehicle-to-home The home’s circuits, with the house disconnected from the grid A bidirectional charger, an inverter (in the car or on the wall) and an isolation device, installed under a permit A permit and inspection; some utilities also want a backup-generation application
V2G, vehicle-to-grid The home and the grid, with the car running in parallel with the utility Equipment listed for grid-interactive operation An interconnection agreement, as for rooftop solar

The Department of Energy’s Federal Energy Management Program uses the same split for fleets: bidirectional vehicles “can provide backup power to buildings or specific loads,” which it calls vehicle-to-building, or can supply power to the grid, which is vehicle-to-grid (DOE FEMP, page updated October 30, 2025). Vehicle-to-everything (V2X) is the umbrella term; PG&E uses it as the name of its program.

Why the outlet on the car is not home backup

V2L is useful on its own. A refrigerator, a phone charger or a space heater can run from the car’s outlets through a properly rated extension cord, and the outlet rating for your model is in the owner’s manual. What V2L does not do is power the house’s circuits. Feeding a house circuit from a cord plugged into a wall outlet bypasses the one thing every V2H system is built around: a device that opens the connection to the utility before the car supplies the house. Without it, power can flow back onto lines that utility crews expect to be dead. Any connection of a portable source to house wiring is a job for a licensed electrician, with a listed transfer switch or interlock and an inspection.

V2G is a different decision

V2G means the car runs in parallel with the grid, either to cover the house during expensive hours while the grid is up or to export power. That is an interconnection question, like adding solar, and most homes considering V2H today are buying backup, not grid services. We come back to it in the utility section, because the line between the two decides which paperwork you need.

What equipment does vehicle-to-home need?

A V2H system does four jobs: it lets energy leave the car (a bidirectional charger), turns the battery’s direct current into 240 V household alternating current (an inverter), disconnects the house from the grid before the car takes over (an isolation device such as a transfer switch or home hub), and keeps the controls alive when the grid is down. Some systems combine these in fewer boxes; GM splits them into four.

GM’s V2H Bundle page (read from a Wayback Machine capture dated August 31, 2026, because the live page refused automated requests) lists the parts:

  • PowerShift Charger. A bidirectional Level 2 charger rated at 19.2 kW and 80 A for charging, with a three-year limited warranty.
  • Home Hub. GM’s V2H page says it “helps you control your home’s energy, disconnect from the grid, and distribute backup power to appliances and systems.” The spec sheet lists whole-home and partial-home backup configurations and a maximum service or disconnect rating of 200 A.
  • Inverter. “Converts the DC power stored by your V2H-capable GM EV into AC power,” with backup power listed at 9.6 kW.
  • Dark Start Battery. “Stores enough low voltage power to jump-start your GM Energy V2H system in the event of a power outage.”

The hub, inverter and dark start battery are sold together as the V2H Enablement Kit, with a 10-year limited warranty on each. GM’s page states that the bundle “is not compatible with battery systems from other manufacturers.”

Ford described its system for the F-150 Lightning in similar terms in 2022: an 80 A Ford Charge Station Pro plus a Home Integration System sold through Sunrun “that allows a two-way flow of electrons,” with a home transfer switch that “disconnects home from the grid,” and both “should only be installed by a licensed professional” (Ford support page, Wayback Machine capture of November 2, 2022).

AC or DC: where the inverter sits

A car battery stores direct current. Something has to turn it into the 240 V alternating current your panel expects, and there are two places to put that inverter.

  1. In the car (AC bidirectional). The vehicle’s own onboard inverter makes AC, and the wall equipment passes it to the house. SAE J3072 is the standard for that onboard inverter function.
  2. On the wall (DC bidirectional). Direct current leaves the car and a separate inverter in the home equipment converts it. GM’s description of its inverter, converting “the DC power stored by your V2H-capable GM EV into AC power,” places the conversion in the home equipment.

Neither design is better in general. The AC design puts the inverter cost and the certification burden in the car. The DC design puts a large box on the wall: GM lists its inverter at 94.8 pounds. What matters to you is that the car, the charger and the home equipment were designed to work together and carry the listings your inspector and utility expect.

Whole-home or a backup panel

A V2H system can feed the whole main panel or a smaller panel of critical circuits, the same choice battery owners make. GM’s hub lists both configurations. A backup panel keeps large loads off the car’s inverter and stretches the energy further; whole-home backup is simpler to live with but needs either load management or a household that stays well under the inverter’s 9.6 kW. Our guide to whole-home versus partial backup walks through that decision for batteries, and the reasoning carries over.

Which standards make V2H safe to connect?

Three documents do most of the work: SAE J3072 for an inverter built into a vehicle, UL 9741 for the charger-side equipment that exports power from a vehicle, and UL 1741 for inverters and interconnection equipment, used with IEEE 1547 whenever equipment runs in parallel with the grid. The listing marks on the equipment, the electrician’s permit and the utility’s rules are what an inspector and a utility look for.

Two ways a car can power a house, and the standards that applyTop row, AC bidirectional: an EV with an onboard inverter meeting SAE J3072 sends AC through a bidirectional charger covered by UL 9741 to an isolation device. Bottom row, DC bidirectional: the EV battery sends DC through a bidirectional charger to an inverter on the wall covered by UL 1741, then to the isolation device. The isolation device feeds the backed-up panel and loads and opens its connection to the utility grid before the car powers the house.AC: the inverter is in the car (SAE J3072)EV withonboardinverterBidirectionalchargerUL 9741ACDC: the inverter is on the wallEV batterysends DCBidirectionalchargerUL 9741Inverteron the wallUL 1741Isolationdevice: hub ortransferswitchBacked-uppanel andloadsUtility gridOpens before the carpowers the house
Simplified diagram of the two V2H designs. Sources: SAE J3072 scope (March 2021 revision), UL 9741 and UL 1741 scopes on the UL Standards store, GM Energy V2H equipment descriptions; all checked November 22, 2026. Real systems differ in how parts are combined.

SAE J3072: the car’s inverter

SAE J3072, “Interconnection Requirements for Onboard, Grid Support Inverter Systems,” establishes requirements for “a grid support inverter system function which is integrated into a plug-in electric vehicle (PEV) which connects in parallel with an electric power system (EPS) by way of conductively coupled, electric vehicle supply equipment (EVSE).” It also defines the communication by which the charger configures and authorizes the car’s inverter “for discharging at a site,” and it is meant to be used with IEEE 1547 and IEEE 1547.1, the interconnection standards for distributed generation. We read the scope of the March 2021 revision from a Wayback Machine capture of SAE’s catalog page; SAE’s live page blocks automated requests, and its catalog also lists a 2024 revision, which we did not read.

In plain terms: if a car makes its own AC and connects through the charger, J3072 is how the car proves its inverter behaves like the grid-support inverters utilities already accept, and how the charger tells it when it may discharge.

UL 9741: the charger-side export equipment

UL 9741 is often described as the bidirectional charger standard. Its title is “Electric Vehicle Power Export Equipment (EVPE),” first edition, published September 29, 2023. It covers “off-board unidirectional and bidirectional equipment rated 1000 Vac and 1500 Vdc or less” that “transfers electrical energy between an electric vehicle and off board loads,” including equipment “operating in parallel with an electric power system, such as the electric utility grid.” Equipment that also charges the car serves as both export equipment and EV supply equipment. The standard lists configurations “with islanding (back-up during grid outage)” and “not islanding (no back-up during grid outage),” expects installation under the National Electrical Code (NFPA 70), and handles the export enable and disable functions through UL 1741 requirements.

UL 1741 and IEEE 1547: inverters and the grid

UL 1741, “Inverters, Converters, Controllers and Interconnection System Equipment for Use With Distributed Energy Resources,” is the same standard that covers solar and battery inverters. Its third edition (published September 28, 2021, last revised August 14, 2026) covers equipment “intended for use in stand-alone (not grid-connected) or interactive (grid-connected) power systems.” For interactive equipment it is meant to be used with IEEE 1547 and IEEE 1547.1. A wall-mounted V2H inverter, like a battery inverter, is the kind of product this listing applies to.

What to ask for

Document What it covers What to ask the installer
SAE J3072 An inverter built into the vehicle that discharges through the charger Does this vehicle discharge as AC through the charger, and does the utility accept it?
UL 9741 Off-board equipment that exports power from a vehicle, with or without islanding Is the charger listed to UL 9741, and in a configuration that islands for backup?
UL 1741 with IEEE 1547 Inverters and interconnection equipment, stand-alone or grid-interactive Is the wall inverter or hub listed, and is the system set up to run in parallel or only during outages?
NFPA 70 (National Electrical Code) How the equipment is installed Which code edition applies here, and who pulls the permit?

Standards are context for this decision, not a reason to buy any product. A licensed electrician and the local inspector decide whether a specific installation meets the code your jurisdiction has adopted.

Which EVs can back up a house as of November 2026?

The vehicle, its model year, its software and the home equipment all have to match. A car that offers V2L outlets, or that supports V2G in a pilot somewhere, may not support V2H with equipment you can buy for your house. The reliable list is the automaker’s own, checked against your exact model year.

System Vehicles listed by the maker Backup power Home equipment Source and date
GM Energy V2H Bundle 2027 Chevrolet Bolt EV; 2026 Chevrolet Blazer EV, Equinox EV and Silverado EV; 2026 GMC Hummer EV SUV, Hummer EV SUT and Sierra EV; 2026 Cadillac Celestiq, Vistiq, Escalade IQ, Optiq and Lyriq Up to 9.6 kW PowerShift Charger plus Home Hub, inverter and dark start battery GM V2H Bundle page, Wayback capture of August 31, 2026
Ford Home Backup Power, formerly Intelligent Backup Power F-150 Lightning Not stated in the pages we read Ford Charge Station Pro (80 A) plus Home Integration System and transfer switch Ford support pages, Wayback captures of November 2, 2022 and January 12, 2026

A few details matter more than the list itself:

  • Model year. GM’s list names 2026 and 2027 models. If you own an earlier model, check GM’s current list before assuming it qualifies.
  • Software activation. Ford said in 2022 that backup software activation was included with the extended-range F-150 Lightning battery and was a one-time purchase for the standard-range battery.
  • Pairing. Ford’s troubleshooting page (Wayback capture, January 12, 2026) tells owners whose Home Backup Power does not activate to plug-cycle the truck, delete and re-pair the truck and the Charge Station Pro, and position the truck so its Bluetooth connection to the charger is strong. A system that depends on pairing should be tested before an outage, not during one.
  • Other makes. We did not verify other automakers’ current US home-backup offers for this article. If your car is another make, ask the automaker which home equipment it supports for your model year, in writing.

Does the utility have to approve V2H?

It depends on whether the system can ever run in parallel with the grid. Equipment that powers the house only while the grid is down is usually treated like a standby generator; equipment that can discharge while the grid is up needs an interconnection agreement, as solar does. Both still need a permit and inspection.

PG&E puts the rule plainly on its V2X program page, checked November 22, 2026: “If the customer’s system will be able to discharge from the vehicle while the utility grid is in operation, it will need to be interconnected under Electric Rule 21. Systems that are only capable of discharging vehicle power when there is a utility grid outage can be installed as backup generation only.” For backup-only systems, PG&E’s application path runs through its online portal as a “Standby Emergency Generator” with the “Break Before Make” option.

“Break before make” describes what the isolation device does: it opens the grid connection before it closes the car’s. That sequence protects line crews and is also why the switchover is not instantaneous. GM’s V2H page notes that “Power supply may be interrupted” and says it does not recommend powering medical devices with its products.

If you already have solar

PG&E says customers with net-metered solar “can install a bidirectional EV charger without impacting the NEM status of that existing system.” The V2X system is added as a non-export generating facility under its NEM Multiple Tariff, and the customer does not receive net metering credits for energy exported from the vehicle. Other utilities handle this differently, so ask before you buy.

Questions for your utility

  1. Does a backup-only V2H system need an application, a notice or nothing beyond the local permit?
  2. If the equipment can run in parallel with the grid, which interconnection rules and listings apply?
  3. Does adding the system change how existing solar is metered or credited?
  4. Is there an incentive, and does it require a specific product list or program enrollment?

PG&E’s V2X program, for example, offers residential customers “upfront incentives of up to $4,500,” plus “up to $4,300 to help cover interconnection costs,” and its enrollment window closes June 30, 2027. If your utility has no V2H page, its interconnection or generator contact is the place to ask. Culni is not affiliated with any utility or program.

How long can an EV run a house?

Hours of backup equal the energy the car can give the house divided by the house’s average load. The energy the car can give is its charge at the start of the outage, minus the driving range you keep, times the conversion efficiency of the inverter. The inverter’s power rating, in kW, then caps what can run at the same moment.

The calculation in four steps:

  1. Energy in the car at the start. Usable pack size times the state of charge when the outage begins. A car at 50% holds half of what the brochure figure assumes.
  2. Subtract the driving reserve. Decide how much range you need to keep for an evacuation, a trip for supplies or the commute when the grid returns.
  3. Apply conversion losses. Multiply by the inverter’s efficiency from its spec sheet. This article uses 95%, the default in our backup runtime calculator.
  4. Divide by the load. Use the household’s average load in kW for hours, or its daily kWh for days.

Reading the manufacturers’ claims

Each runtime claim rests on an assumed daily load and starting charge, and the assumptions are usually in a footnote.

  • Ford, 2022. Ford said the F-150 Lightning could power a home “with full power for three days” or up to ten days when power is rationed, “Based on 30 kWh use per day using the F-150 Lightning with the extended-range battery.” Three days at 30 kWh a day is 90 kWh delivered.
  • PG&E’s example. PG&E says a standard-range F-150 Lightning starting at 80% charge can “Power an entire home for two days,” power critical appliances such as a fridge “for as long as a month,” and “Still keep 20% of the battery to power the vehicle.”
  • GM. GM’s V2H page says a 2026 Chevrolet Silverado EV Max Range can power a properly equipped home in a blackout for “UP TO 5 DAYS.” The capture we read did not show the footnote with the assumed load.

For scale, EIA reports that the average US residential customer bought 10,791 kWh in 2022, about 899 kWh a month. Divided by 365, that is about 29.6 kWh a day, so Ford’s 30 kWh assumption sits close to the national average purchase. Your own bill gives a better number, and a backup panel with a short list of loads changes the answer far more than the choice of car does.

Example (fictional). Take the site’s fictional example home and compare its 13.5 kWh battery with a hypothetical car holding 75 kWh usable (the example home does not specify its car’s pack, so 75 kWh is our assumption). Two load cases: the seven critical loads in the battery sizing worksheet default, which use 7.80 kWh a day (0.325 kW on average) and draw 2.83 kW if all run at once; and the whole house, which uses 29.0 kWh on the example day without the car (1.21 kW on average). Both sources start the outage in their best state, with the battery full and the car at 80%, and both convert at 95%.

  • Battery: 13.5 kWh x 0.95 = 12.8 kWh delivered. Critical loads: 12.8 / 0.325 = about 39.4 hours. Whole house: 12.8 / 1.21 = about 10.6 hours.
  • Car: 75 kWh x 0.80 = 60 kWh in the pack. Keep 20 kWh for driving: two days of the example home’s 35 miles at 3.5 miles per kWh is 70 / 3.5 = 20 kWh. That leaves 40 kWh, and 40 x 0.95 = 38 kWh delivered. Critical loads: 38 / 0.325 = about 117 hours, close to five days. Whole house: 38 / 1.21 = about 31 hours.

Power is not the limit here: 2.83 kW of critical loads fits within both the battery’s 5 kW and GM’s 9.6 kW. The worst case is different. If the outage starts at 7 p.m. on a weekday after the battery has covered the evening peak down to its 20% reserve, the battery holds 2.7 kWh and gives the critical loads about 7.9 hours (2.7 x 0.95 = 2.57 kWh; 2.57 / 0.325). If it starts at 10 a.m., the car is away until 6 p.m. and gives nothing until it returns.

Hours of backup from a home battery and from a car, on the same loadsFictional example. On critical loads of 7.80 kWh a day, a full 13.5 kWh battery gives about 39.4 hours and a car at 80% of a hypothetical 75 kWh pack, keeping 20 kWh for driving, gives about 117 hours. On the whole house at 29.0 kWh a day, the battery gives about 10.6 hours and the car about 31 hours. Both convert at 95%.Battery, critical loads39.4 hCar, critical loadsAbout 117 hBattery, whole house10.6 hCar, whole house31.4 h024487296120Hours of backup, starting full (battery) or at 80% (car)
Example (fictional) data: the example home's 13.5 kWh battery and a hypothetical car with 75 kWh usable at 80% charge, keeping 20 kWh for driving; 95% conversion; critical loads from the battery sizing worksheet default (7.80 kWh a day); whole-house use of 29.0 kWh a day. Not a measurement of any vehicle or product.

Power limits: kW is a separate question

Energy (kWh) decides how long; power (kW) decides what can run together. GM’s 9.6 kW is the most its V2H equipment will deliver at once. A house running central air, an electric range and a water heater at the same moment can exceed that, and motors such as well pumps and compressors briefly draw more when they start. If the car feeds the whole panel, an electrician’s load calculation decides whether you need load management or a backup panel. Our guide to EV charger amps and your panel covers how those calculations work for charging.

Outages are mostly a few long events

EIA reported on December 1, 2025 that US customers averaged 11 hours of interruptions in 2024, “nearly twice as many as the annual average experienced in the decade before.” Major events such as Hurricanes Beryl, Helene and Milton caused 80% of those hours, while interruptions outside major events “routinely average about two hours per year.” South Carolina customers averaged nearly 53 hours. That pattern favors large energy stores: on most days nothing happens, and when something does, it can last days.

V2H versus a home battery

A car brings more kWh; a stationary battery brings availability and daily use. Which one suits you depends on how often the car is away when outages tend to happen, how long your outages last, and whether you want the battery working on your rate every day.

Question V2H with a car Home battery
Energy available Often several times a home battery’s, minus the range you keep Fixed: the battery’s usable kWh, such as 13.5 kWh in the example home
Power GM lists 9.6 kW Varies by model; GM’s PowerBank lists up to 5 kW (10.6 kWh), 7 kW (17.7 kWh) or 9.6 kW (35.4 kWh) during an outage
Available when The car is parked at home and charged Always on the wall
Daily rate shifting Not with backup-only equipment; only with grid-parallel equipment the utility has approved Yes, where its mode and the interconnection agreement allow
Recharging in a long outage Drive to a working charger, or solar if the system is designed for it Solar, if the system is designed for it
Cost of the home side (GM list prices, August 2026) V2H Bundle $8,998; Enablement Kit $6,999 if you already own the PowerShift Charger GM Energy Home System, which adds PowerBank storage, from $16,997
What wears The car’s traction battery, under the automaker’s warranty terms The home battery, under its own warranty

GM’s prices come from its V2H page as captured on August 3, 2026, where they were shown as “Was” prices beside a temporary discount; installation and taxes are extra. GM’s own estimates for its PowerBank, “running an average American home,” are up to 6 hours for 10.6 kWh, 10 hours for 17.7 kWh and 20 hours for 35.4 kWh. For a V2H bundle without a PowerBank, GM says backup time depends on the vehicle model and its state of charge.

What a backup-only car cannot do every day

Example (fictional). On the example home’s clear April weekday, with a Culni schedule, the 13.5 kWh battery covers the house from 5 to 9 p.m. on the example rate’s 31 cent peak, delivering 7.2 kWh, and the day buys nothing at the peak price. The car is plugged in at 6 p.m. A backup-only V2H system covers none of that peak, because it discharges only when the grid is down. A grid-parallel system, if the equipment supported it and the utility approved it, could cover at most the hours after 6 p.m. The 5 p.m. hour, when the house needs about 1.0 kWh beyond what the panels supply (2.0 kWh of use against 1.0 kWh of solar), would still be bought at 31 cents, about $0.31. One clear spring weekday is not a month or a year; cloudy days, winter and weekends change the result.

When each one fits

  • V2H fits better when outages in your area tend to last a day or more, the car is usually home on the days storms arrive, you already own or are buying a V2H-capable vehicle, and your rate gives little reward for shifting use out of a peak.
  • A home battery fits better when the car is often away during the day, outages are short and frequent, your rate has a large peak-to-off-peak gap the battery can work every weekday, or you have solar and want to store it.
  • Both make sense where outages are long and the rate rewards shifting. The battery handles the daily peak and the first hours of an outage; the car extends a long one. GM sells a combined system, and other combinations depend on whether the equipment is designed to share one isolation device. Whether rooftop solar keeps working during the outage is a separate design question, covered in our article on solar panels in a power outage.

Range, battery wear, warranty and cost: the trade-offs

V2H spends the same battery you drive on, so the trade-offs are range, wear and the warranty that covers them, plus the cost of equipment that sits idle most of the year.

Range you keep

Decide on a minimum state of charge before an outage, not during one. A sensible floor covers a drive to shelter or to a working public charger, which may be farther away than usual if the outage is regional. PG&E’s example keeps 20% of the battery for driving; your number depends on your car, your distances and the season, since cold weather cuts range.

Battery wear

Every kWh the house draws is a kWh the traction battery has to cycle through, on top of driving. How much that adds to wear depends on chemistry, temperature and how deeply the pack is drained, and we did not find manufacturer data on it in the pages we read. Occasional outage use adds far fewer cycles than daily use for rate shifting would.

Warranty language

The pages we read from GM and Ford describe the equipment warranties (GM lists three years on the PowerShift Charger and ten years on the hub, inverter and dark start battery) but do not say how discharging to a house is treated under the vehicle’s battery warranty. Ask the automaker in writing whether home discharge through its approved equipment affects the traction battery warranty, and whether discharge through other equipment does. Warranty terms are set by the automaker, sometimes program by program: DOE’s FEMP page notes that in a Danish V2G project, “Nissan gives full warranty on the battery for the vehicles used in the project.”

Cost and incentives

Budget for the equipment, the installation, any panel work, the permit and any utility application fees. Federal credits do not help with new purchases: the IRS says the Alternative Fuel Vehicle Refueling Property Credit (30C) applied to home property placed in service from January 1, 2023 to June 30, 2026. Utility and state incentives, such as PG&E’s V2X program, have their own rules and end dates. A tax professional decides what applies to you.

Getting a V2H system ready before the next outage

V2H works best when it has been installed, inspected, tested and practiced well before storm season. The steps below follow the order the decisions arrive in.

  1. Confirm the vehicle. Check your exact model year and trim against the automaker’s current V2H list and ask whether any software activation is needed.
  2. List the loads. Write down what must run in an outage and estimate daily kWh and the largest combined kW. The battery sizing worksheet does this for a home battery, and the same numbers apply to a car.
  3. Choose whole-home or a backup panel. Compare the combined kW with the inverter’s rating; the electrician’s load calculation decides.
  4. Check listings and the permit. Ask which standards the charger, inverter and isolation device are listed to, and confirm the electrician will pull the permit.
  5. Ask the utility. Find out whether a backup-only system needs an application and what changes if the system can run in parallel with the grid.
  6. Test at commissioning. Ask the installer to demonstrate a switchover to backup and back, with you watching the app.
  7. Set the driving floor. Enter the minimum charge you will keep in the vehicle or app setting that controls backup discharge.
  8. Write a storm routine. When a storm is forecast, charge the car to a higher level, park it at home and leave it plugged in.
  9. Retest after updates. After a vehicle or charger software update, and at the start of each storm season, run the switchover again.

Our outage readiness checklist covers the rest of the household side, and how to set a battery reserve before a storm explains the same thinking for a home battery.

How a daily schedule fits a car that doubles as backup

Most days, a V2H-capable car is simply a car that needs charging, and the cheapest way to charge it depends on the rate. Culni makes software that reads a home’s electricity rate and runs one daily schedule across rooftop solar, a home battery, EV charging and flexible loads, then checks the result against the bill each month.

For the car, the EV charging schedule charges by departure time in the cheapest hours of your rate, and you set the target. On a day with a storm watch, raising that target is the one change that matters for backup. For a home battery, the backup reserve setting keeps a share of the battery for outages and can rise before bad weather. Culni does not install, configure or control V2H equipment, transfer switches, inverter protection settings or interconnection settings; those belong to the installer, the electrician and the utility. Whether a car or charger can take instructions in your home is confirmed home by home, as the devices page explains, and anything that cannot connect is listed as manual with the settings to enter by hand.

If you are deciding between a battery and V2H for a home with an EV, the EV homes page describes how charging, rates and programs fit together, and the fictional example home shows a full day for a house with solar, a battery and one EV on an example rate.

What to do next

Work through these before you buy equipment or a car for backup:

  • Find your outage pattern. Note how long your recent outages lasted and what time of day they began. Long outages favor a car’s larger store; daytime outages favor a battery that is always home.
  • Measure your loads. List the circuits you need and their daily kWh in the battery sizing worksheet, then run the hours in the backup runtime calculator.
  • Get the automaker’s answer in writing on V2H support for your model year and on the battery warranty.
  • Ask the utility whether backup-only V2H needs an application in your area and what changes if the system can run in parallel.
  • Get an electrician’s quote that names the equipment listings, the panel work and the permit.

If you want the whole picture for your home, with your rate, your bills and your devices, the home energy plan sets out the rate decoded, the backup reserve and the hours it gives for the loads you list, and the daily schedule. How it works explains the steps, and you can send your rate plan, a recent bill and your device list to start one.

TodayYour turn

Want this worked out for your home?

Send your utility and rate plan, one recent bill and the devices you have or plan. We reply with a written home energy plan and every assumption behind it.

Remote. No site visit needed.