Heat pumps and the all-electric home
Running heat pumps, water heaters and thermostats around the peak without giving up comfort.

5 articles
Newest issue first. Issue dates follow the editorial calendar.
Issue:
Smart thermostat demand response and peak time rebates: are they worth it?
How smart thermostat demand response programs, peak time rebates and critical peak pricing pay, what pilots found, and when an event costs you money.
Issue:
Can a 100-amp panel run an all-electric home? Load math and options
Can a 100 amp panel run an all-electric home? How the NEC load calculation decides, a worked example, and the options that can avoid a 200 amp upgrade.
Issue:
Why your heat pump bill jumps in winter: auxiliary heat strips explained
Heat pump auxiliary heat high bill? Why strips run, the balance point, settings that waste power, what strips cost on time-of-day and demand rates, and fixes.
Issue:
Pre-cooling and pre-heating on time-of-use rates: does it save money?
Pre-cooling your house before peak hours moves AC use into cheaper hours. How many degrees, how early, when it backfires, and how to pre-heat without strips.
Issue:
How to schedule a heat pump water heater for time-of-use rates
Heat pump water heater time of use settings: which mode to pick, how far to load up before a peak, and summer and winter schedules that keep showers hot.
Heating, cooling and hot water are the loads with the most room to move. A well-insulated house or a full tank of hot water can coast through a two-hour peak if it is warmed or cooled first, and the same equipment can run up a winter bill quickly when backup heat strips switch on. The articles in this section explain how to shift these loads on a time-of-use rate and where the limits are.
What this section covers
- Heat pump water heaters: heating before the peak, tank size and mixing valves, and the modes that use resistance elements.
- Pre-heating and pre-cooling: when moving heating or cooling ahead of the peak saves money and when it only moves the bill.
- Auxiliary heat: why a heat pump bill can jump in cold weather, and the thermostat settings that decide when strips run.
- Panel capacity: whether a 100-amp panel can carry an all-electric home, and the load calculations and load management that decide it.
- Thermostat programs: demand response and peak time rebates, what they pay and what they control.
How to use these articles
The appliance energy cost calculator prices any load by rate window, and the flexible loads page explains how Culni times water heaters, heat pumps and pool pumps within the comfort limits you set. All-electric homes covers the winter peaks that matter most for heat pumps.
Comfort and safety limits come first: these articles do not recommend water temperatures below safe settings or thermostat settings that put people or pipes at risk. Worked examples are labeled fictional.
TodayYour turn
Send your rate and your devices
Your utility and rate plan, one recent bill and the devices you have or plan. We reply with a written home energy plan: your rate decoded, which devices can connect, the daily schedule and its estimated value with every assumption shown.
Remote. No site visit needed.