Appliance energy cost calculator
What one appliance costs to run in each rate window, from its watts and how often you use it.
- You enter
- Watts, hours per use, uses per month, three prices
- You get
- kWh per use and per month, cost in each window
- Example
- Fictional: a 5,000 watt dryer, 12 loads a month
- Runs
- In your browser; nothing you type is sent

Calculator
Every appliance turns power (kW) into energy (kWh) over time, and every kWh has a price that depends on the hour on a time-of-use rate. Once you know an appliance’s kWh, the rate decides the rest. This calculator does both steps, so you can see which appliances are worth moving out of the peak first.
What each input means and where to find it
| Input | What it means | Where to find it |
|---|---|---|
| Power while running | Watts the appliance draws when it is on | The nameplate (inside the door, on the back or under the base) or the owner’s manual. If only amps are listed, multiply amps by volts (120 or 240). For plug-in appliances, a plug-in energy meter measures it directly |
| Hours per use | How long one use lasts | Your own timing, or the cycle length in the manual |
| Uses per month | How often you run it | Your own count |
| Peak, day and off-peak prices | Energy charge per kWh in each window | Your rate schedule. On a flat rate, enter the same price in all three |
The formula in plain words
- kWh per use = watts ÷ 1,000 × hours per use.
- kWh per month = kWh per use × uses per month.
- Cost in each window = kWh per month × that window’s price.
- Moving it from peak to off-peak, per year = kWh per month × (peak price minus off-peak price) × 12.
Example (fictional). The calculator opens with an electric clothes dryer rated 5,000 watts, running 1 hour per load, 12 loads a month, priced at the fictional example rate: 31 cents per kWh at the peak, 14 cents in day hours and 8 cents off-peak. Each load uses 5.00 kWh, or 60.0 kWh a month. Run at the peak, that costs $18.60 a month; in day hours, $8.40; off-peak, $4.80. Moving it from peak to off-peak is worth $165.60 a year if every month looked like this one.
How to read the result
On a time-of-use rate, the window can matter as much as the appliance. In the example, the same 60 kWh costs nearly four times as much at the peak as off-peak. The yearly line is best used to rank appliances against each other: the ones with the most kWh and the most freedom in timing go first. In many homes that means EV charging, the water heater, the dryer, the dishwasher and the pool pump, but your own numbers decide the order.
On a flat rate, the window does not change the cost, but the kWh still tell you where your money goes. For scale, EIA’s preliminary figures put the average US residential price at 18.16 cents per kWh in August 2026 and Kentucky’s at 13.80 cents. Those are averages across all residential customers, not the energy charge on any one rate schedule.
Limits
- Many appliances cycle. A dryer’s heating element, a water heater, a refrigerator and a heat pump switch on and off under a thermostat, so they use less than their rating times the hours they are switched on. Measure them where you can.
- Standby power is left out. Small for most appliances, but it adds up across a house.
- Variable-speed equipment such as modern heat pumps rarely runs at its nameplate power.
- Comfort comes first. Moving a dryer load is easy; moving cooling on a hot afternoon is a different decision, best made with pre-cooling rather than switching off.
What to do next
Once you know which loads are worth moving, the time-of-use savings calculator shows what moving a share of your whole peak use is worth. List the appliances you own in the home energy inventory worksheet, and use the battery sizing worksheet for the ones you want during an outage.
Culni’s flexible loads scheduling times heat pump water heaters, pre-heating and pre-cooling, pool pumps and dryers against your rate, within the comfort limits you set, with automatic control only where a control path is confirmed for your home. The all-electric homes page covers houses with heat pumps and induction cooking. To see which of your loads are worth moving, check my home.
TodayYour turn
Send your rate and your devices
Your utility and rate plan, one recent bill and the devices you have or plan. We reply with a written home energy plan: your rate decoded, which devices can connect, the daily schedule and its estimated value with every assumption shown.
Remote. No site visit needed.