4 to 9 p.m.
in the example home
Time-of-use savings calculator
How much moving part of your peak use to off-peak hours lowers the energy charges on your bill.
- 4 p.m. to 9 p.m. example peak
- You enter
- Monthly kWh, peak share, movable share, two prices
- You get
- kWh moved and the lower energy charge per month
- Example rate
- Fictional: 31 cents peak, 8 cents off-peak
- Runs
- In your browser; nothing you type is sent

Calculator
A time-of-use rate charges more for electricity in a few peak hours and less overnight. The rate on its own does not lower a bill. Moving use out of the peak does. This calculator estimates how much, from five numbers: what you buy in a month, how much of it falls in peak hours, how much of that you could move, and the two prices.
What each input means and where to find it
| Input | What it means | Where to find it |
|---|---|---|
| Monthly electricity use | kWh bought from the utility in one billing period | The usage line on your bill. Pick a typical month, not your highest |
| Share of use in peak hours | The percentage of that use that falls in the peak window | A time-of-use bill often splits kWh by window. Otherwise, the hourly data in your utility account or a Green Button download |
| Share of that peak use you can move | How much of the peak use could run at another hour | Your own list. EV charging, laundry, the dishwasher and water heating move easily; cooking, lighting and most cooling do not |
| Peak price | Energy charge per kWh in the peak window | The rate schedule (tariff) for your plan, not the bill total divided by kWh |
| Off-peak price | Energy charge per kWh in the cheapest window | The same rate schedule |
The default of 900 kWh is close to what EIA reports for the average US home: 10,791 kWh in 2022, about 899 kWh a month. Homes with solar buy less than they use, so enter the kWh you buy, as the bill shows it.
If your bill does not split use by window, your meter may still record it. EIA counted about 73% of US residential meters as AMI (smart) meters in 2022, measuring use at least hourly. Many utility accounts offer that data as a download.
The formula in plain words
- Peak use = monthly use × share in peak hours.
- Use moved = peak use × share you can move.
- Lower bill per month = use moved × (peak price minus off-peak price).
- Per year, if every month matched this one = the monthly figure × 12.
Example (fictional). The calculator opens with the fictional example rate used across this site: 31 cents per kWh at the 4 to 9 p.m. weekday peak and 8 cents off-peak (9 p.m. to 7 a.m.). A home buys 900 kWh a month, 25% of it in peak hours, and can move 40% of that peak use. Use in peak hours is 225.0 kWh and the use moved to off-peak is 90.0 kWh. The price difference is $0.23 per kWh, so the energy charges fall by $20.70 a month, or $248.40 a year if every month looked like this one.
How to read the result
“Lower bill per month” is the change in energy charges only. Fixed charges, riders and taxes stay the same whichever hour you use the energy, so the calculator leaves them out. A negative result means the off-peak price you typed is higher than the peak price.
Treat the yearly line as a rough scale, not a forecast. Many rates move their peak between seasons. LG&E and KU’s RTOD-Energy rate, for example, has one weekday on-peak block from April through October and two (morning and evening) from November through March, set in Eastern Standard Time all year. Use that changes with the weather, such as heating and cooling, shifts too. Run the calculator once for a summer month and once for a winter month.
For a Kentucky comparison: LG&E’s RTOD-Energy rate charges $0.19307 per kWh on-peak and $0.09312 off-peak, effective September 1, 2026 (base energy charges before riders and taxes, tariff Sheet No. 6). That spread is just under 10 cents, less than half of the example rate’s 23 cents. Enter those two prices and the result shrinks accordingly.
Limits
- It does not say whether a time-of-use rate beats your current rate. The use you cannot move still pays the peak price. LG&E and KU say it plainly: “If you do not shift the time of day that you use energy or you consume energy during on-peak times, your bill may go up.” The rate plan comparison calculator answers that question.
- It ignores the day window. Energy moved from the peak into day hours saves less than energy moved overnight.
- Shifting with a battery is not loss-free. Some energy is lost on the way in and out. The battery arbitrage calculator counts that loss.
- Moving use takes effort every day. A share you can move in theory is not the share you will move on a busy weeknight.
What to do next
Price the big movable loads one at a time with the appliance energy cost and EV charging cost calculators. To see what moving use looks like hour by hour, the example home walks through a fictional day before and after a schedule.
The hard part is not the arithmetic but doing the shifting every day without thinking about it. Culni’s EV charging and flexible loads scheduling moves the car, the water heater and other loads into cheaper windows, based on your actual rate as decoded by the rate engine. To find out what that could be worth in your home, check my home with your rate plan, a recent bill and your device list.
TodayYour turn
Send your rate and your devices
Your utility and rate plan, one recent bill and the devices you have or plan. We reply with a written home energy plan: your rate decoded, which devices can connect, the daily schedule and its estimated value with every assumption shown.
Remote. No site visit needed.