noon to 2 p.m.
2 to 4 p.m.
in the example home
All-electric homes
Heating, hot water and cooking on one meter, timed around the rate without giving up comfort.
- noon to 2 p.m. water heater runs on solar
- 2 p.m. to 4 p.m. pre-heats or pre-cools
- You send
- Heat pump and water heater models, thermostat, comfort range
- You get
- Water heater timing and pre-heat hours by season
- Stays with you
- The comfort range and any thermostat program
- Limits
- Comfort first, no equipment efficiency promises

In an all-electric home, heating, cooling, hot water and cooking all run through one meter. That makes the electric bill larger and more seasonal, and it makes the shape of the rate matter more: on a cold weekday morning, the heat pump’s hardest work can land in the same hours as a utility’s peak. Some of these loads can move by an hour or two without anyone noticing. Others cannot, and the plan treats them differently.
Which loads can move
| Load | Can it move? | How the schedule uses it |
|---|---|---|
| Heat pump water heater | Yes, the tank holds hot water for hours | Reheats in cheap or sunny hours and coasts through the peak |
| Heat pump, heating and cooling | Partly, inside your comfort range | Pre-heats or pre-cools before a peak, then eases off |
| Induction cooktop and oven | No | Left alone, because meals happen when they happen |
| Dryer and dishwasher | Yes, on a delay | Start times suggested outside the peak |
Nobody should eat dinner at 9:15 p.m. to save a few cents, so cooking stays off the schedule. The value is in the water heater and the heat pump.
Comfort first
You set the comfort range: the lowest and highest indoor temperature you accept, and the hours when it matters most, such as sleep or working from home. Pre-heating raises the indoor temperature a little before a peak and lets it drift back inside your range during the peak. Pre-cooling does the same on summer afternoons. If the weather is extreme and holding your range means running the heat pump in the peak, it runs.
Culni makes no promises about equipment efficiency, and it does not override the controls or safety limits built into the thermostat or the heat pump. If you are enrolled in a utility thermostat program, the program’s events take priority on event days. Flexible loads explains how each load is timed and when control needs a confirmed path.
Winter peaks
Summer peaks usually fall in the afternoon, which suits homes with solar. Winter is different. On LG&E and KU’s optional RTOD-Energy rate, weekdays from November through March have two on-peak windows: 6 to 10 a.m. and 6 to 10 p.m. Eastern Standard Time. A cold morning is when a heat pump works hardest, so in an all-electric home the morning window can matter as much as the evening one.
At LG&E the RTOD-Energy charge is $0.19307 per kWh on-peak and $0.09312 off-peak (effective September 1, 2026, base charges before riders and taxes), so each kWh moved out of a peak window is worth about 10 cents. At KU the gap is wider, $0.24040 against $0.07811, or about 16 cents. In the daylight saving weeks of March and early November, the utility’s web page shows the windows one hour later on the clock, 7 to 11 a.m. and 7 to 11 p.m. The rate needs an AMI meter and is limited to 500 customers, so check eligibility before you plan around it. The rate engine reads every season and day type of your own rate, and the Louisville and Kentucky page covers the local context.
On a flat rate the hour of use does not change the price, so the plan focuses on whether a time-of-day rate would pay, given how much of your heating and hot water can move.
Heat pump water heaters
A water heater is one of the most flexible loads in a home. A heat pump water heater keeps hot water in an insulated tank, so the schedule can reheat it in the hours that cost least, overnight or at midday when solar would otherwise be exported, and keep a long reheat from starting in the evening peak. Where the water heater has a connected control path, Culni times it directly. Where it does not, the plan gives you the timer or mode setting to use.
Example (fictional). Take the example home without its battery or car, and suppose 2.0 kWh of its evening use is a heat pump water heater reheating after showers and dishes from 6 to 8 p.m., at the example rate’s 31 cent peak price.
- Sunny April weekday. Moved to noon to 2 p.m., the reheat runs on solar surplus that would have earned the 7 cent export credit. The household buys $0.62 less and earns $0.14 less in credit: $0.48 lower for the day.
- Cloudy weekday. With no surplus, the reheat is bought at the 14 cent day price instead: $0.34 lower.
- Cold weekday, pre-heating. Suppose the heat pump runs an extra 2.0 kWh from 2 to 4 p.m. at 14 cents and then uses 1.5 kWh less from 4 to 6 p.m. at 31 cents. The other 0.5 kWh is heat the house loses while it coasts. That is $0.47 avoided for $0.28 spent: $0.19 lower for the day.
These are assumptions chosen to show the arithmetic, not measured equipment figures. Fixed charges are left out, and one day is not a month or a season.
Tax credits
The federal Energy Efficient Home Improvement Credit (25C), which had allowed up to $2,000 a year for qualified heat pumps and heat pump water heaters, is not allowed for property placed in service after December 31, 2025. Do not count on it when pricing a replacement. Planning a system lists the federal credits that ended and when. Culni gives no tax advice.
What you send and what you get
Send the heat pump and water heater models, the thermostat, your comfort range and the hours that matter, plus your rate plan and, if you have them, a recent winter bill and a recent summer bill. You get the loads that can move with the hours to move them to, by season, the pre-heat and pre-cool hours inside your comfort range, a rate comparison where you have a choice, and the estimated value with every assumption shown. The appliance energy cost calculator shows what one load costs in each window.
TodayYour turn
Send your rate and your devices
Your utility and rate plan, one recent bill and the devices you have or plan. We reply with a written home energy plan: your rate decoded, which devices can connect, the daily schedule and its estimated value with every assumption shown.
Remote. No site visit needed.