Rates and bills
How your rate sets the price of each kWh, and how to read the documents that say so.

5 articles
Newest issue first. Issue dates follow the editorial calendar.
Issue:
How time-of-use electricity rates work, and who saves on them
Time-of-use rates price each kWh by hour, weekday and season. See how peak windows, price ratios and fixed charges decide if you pay less than a flat rate.
Issue:
LG&E and KU time-of-day rates: when RTOD-Energy or RTOD-Demand pays
The LG&E time of day rate beats Rate RS only if under 21.9% of your use is on-peak (22.1% at KU). Current prices, peak hours, RTOD-Demand and who gains.
Issue:
Green Button data: how to download your smart meter usage and read it
Green Button data is your smart meter's hourly or 15-minute usage. How to download it, what the file holds and how to read it against a time-of-use rate.
Issue:
Residential demand charges: how a kW charge works and how to keep it low
A residential demand charge bills your highest 15-minute or hourly kW, not only your kWh. See how it is measured, which habits set it and how to keep it low.
Issue:
How to read your electric rate schedule (tariff sheet)
How to read an electric rate schedule: find your tariff, read its header, availability, rates and riders, and turn it into the price you pay per kWh.
Every plan in your home starts from the rate. The same kWh can cost three or four times as much at 6 p.m. as at 2 a.m. on a time-of-use plan, while a flat plan charges the same at every hour and some plans add a charge for your highest hour of demand. The articles in this section explain how those structures work and how to read them in the documents your utility publishes.
What this section covers
- Time-of-use rates: rating periods, seasons, weekends and holidays, and the share of your use that has to move for a time-of-use plan to beat a flat one.
- Tariff sheets: where the windows, prices, fixed charges and riders are written, and which lines on a bill come from which part of the tariff.
- Demand charges: how a charge per kW works on residential rates, and why the timing of your largest loads matters more than their total.
- Your own usage data: Green Button downloads and smart meter intervals, and what you can learn from twelve months of hourly use.
- A Kentucky case: the LG&E and KU residential time-of-day rates, with their windows set in standard time all year and a cap on enrollment.
How to use these articles
Read the time-of-use explainer first, then compare your own numbers with the rate plan comparison calculator and the time-of-use savings calculator. The utility bill checklist lists what to find on your bill and rate schedule before you change anything.
Real tariff values in these articles carry the sheet, the utility and the effective date, as base charges before riders and taxes. Worked examples that use the example rate (8 cents off-peak, 14 cents in the day, 31 cents at the peak) are labeled fictional. The rate engine page explains how Culni turns a rate schedule into the windows its schedule runs on.
TodayYour turn
Send your rate and your devices
Your utility and rate plan, one recent bill and the devices you have or plan. We reply with a written home energy plan: your rate decoded, which devices can connect, the daily schedule and its estimated value with every assumption shown.
Remote. No site visit needed.