Culni homeCheck my home
Menu

1 to 3 a.m.
4 to 9 p.m.

in the example home

Monthly bill check

Each month, the estimate next to your actual bill, with every difference explained.

  • 1 a.m. to 3 a.m. car charging checked
  • 4 p.m. to 9 p.m. peak purchases checked
You send
Each month's bill, or a Green Button download
You get
Estimate against actual, what moved, what changes next
The record
Your utility bill, never the estimate
Limits
Estimates will differ; riders are estimated
A pair of reading glasses rests on a wall calendar page of plain empty squares, one square outlined in ember.

Every plan starts with an estimate: what the schedule should cost and save, given your rate, your devices and a forecast of weather and use. An estimate is a prediction. The bill is the record. Once a month, Culni puts the two side by side, line by line, and explains the difference. Without that check, nobody, Culni included, knows whether the schedule did what it said it would.

What the check compares

Line The estimate comes from The actual comes from
kWh bought, by window The schedule and the usage forecast The bill, or interval data from your meter
kWh exported, and the credit The solar forecast and your export credit The net metering lines on the bill
Fixed charges Days in the billing period times the daily charge The bill
Riders and adjustments A recent value for each rider The bill
Taxes and fees Your recent bills The bill

How fine the check can be depends on your meter. Smart (AMI) meters measure use at least hourly and make the data available to the utility and the customer at least once a day; EIA counted about 73% of US residential meters as AMI in 2022. With interval data, the check works hour by hour: did the car charge from 1 to 3 a.m. as planned, and did the house buy anything during the peak? Without it, the check compares totals by window where the bill shows them, or the monthly total where it does not.

What moves a bill

  • Weather. Cloudy weeks cut solar production and exports. Hot and cold spells raise cooling and heating.
  • Usage. Guests, a new freezer, a long drive in the car, a week working from home.
  • A rate change. Base rates change through rate cases: LG&E’s residential rates changed in February 2026 and again on September 1, 2026, under Kentucky Public Service Commission orders. Riders such as the fuel adjustment can change every month.
  • Events. A utility program event, a storm watch that held the battery full, an outage that used the reserve, or a device that went offline.
  • The calendar. Billing periods vary in length, and meter read dates rarely match calendar months. More days mean more fixed charges and more use.

Example (fictional). A fictional household on the example rate (off-peak 8 cents, day 14 cents, peak 31 cents per kWh, export credit 7 cents; fixed charges, riders and taxes left out) gets this check for a spring billing period. These are not results from a real home.

Estimate Actual Difference
Off-peak 560 kWh, $44.80 590 kWh, $47.20 +$2.40
Day 20 kWh, $2.80 22 kWh, $3.08 +$0.28
Peak 40 kWh, $12.40 56 kWh, $17.36 +$4.96
Export credit 380 kWh, minus $26.60 341 kWh, minus $23.87 +$2.73
Net energy cost $33.40 $43.77 +$10.37

What moved. Weather, $5.83: four more overcast days than forecast cut exports by 39 kWh ($2.73 less credit), and on those days the battery started the peak less than full, so the house bought 10 more peak kWh ($3.10). Usage, $4.54: a weekend road trip added 30 off-peak kWh of car charging ($2.40), the dryer ran in the peak on two evenings (6 kWh, $1.86), and day-hour use rose by 2 kWh ($0.28). Rate and events: none this period. What changes: a reminder to run the dryer after 9 p.m. on weekdays, and on overcast forecasts an off-peak top-up of the battery, where the equipment and the interconnection agreement allow grid charging.

The bill is the record

The utility’s bill decides what you owe. Culni’s estimate never replaces it, and the check explains differences instead of smoothing them over. Estimates will differ from bills; the point is to know by how much and why.

If something on the bill itself looks wrong, such as a rate schedule you did not choose or an estimated meter read, the check flags it so you can raise it with your utility. Questions about the bill go to the utility; Culni gives no legal advice.

Keep in mind what a bill shows: energy bought and exported at the meter, not what the house used. EIA notes that with net-metered solar, a household’s consumption “may be a lot higher than household electricity purchases”. Where your inverter or battery reports its own data through a confirmed connection, the check uses it to separate what the panels made from what the house used.

Green Button

Green Button, launched in January 2012, lets utility customers “securely download their own detailed energy usage” in a standard format. The Department of Energy lists over 50 utilities and electricity suppliers that have signed on; that figure is older, so check with your utility. If yours offers it, a monthly download of interval data, sent with the bill, makes the check hour by hour. If not, the bill alone works, and the check is coarser. What data Culni reads and keeps is set out on security and data.

What changes after the check

Each check ends with what changes in the schedule, if anything: a charging target, the reserve, a window that moved with a rate change, a device that needs attention. Larger changes, such as a new rate, a new device or a new driver in the house, go through the Adjust step described on how it works. When the rate itself changes, the rate engine decodes the new sheets before the next month is estimated.

What you send and what you get

Send each month’s bill as a PDF or photo, or a Green Button download if your utility offers one. You get the estimate against the actual bill line by line, what moved and by how much, and what changes in the schedule. The utility bill checklist shows what to find on a bill if you want to read one yourself first.

TodayYour turn

Send your rate and your devices

Your utility and rate plan, one recent bill and the devices you have or plan. We reply with a written home energy plan: your rate decoded, which devices can connect, the daily schedule and its estimated value with every assumption shown.

Remote. No site visit needed.