Home energy inventory worksheet
One table of every device that makes or uses a lot of energy at home, ready to send with your request.
- You list
- Device, model, rating, location, how you control it
- You get
- A CSV or printout to attach to your request
- Example rows
- Fictional: the example home's six devices
- Why it matters
- Each control path is checked for your home

Worksheet
The rows describe the fictional example home. Replace them with your devices, add rows, then download a CSV or print it to send with your request. Nothing leaves your browser.
| Device | Brand and model | Size or rating | Where it is | How you control it today | Notes | Remove |
|---|---|---|---|---|---|---|
Before a schedule can run, someone has to know exactly what is in the house: which inverter, which battery, which car and charger, which thermostat and water heater, and how each one is controlled today. This worksheet is that list in one table. It is the device part of the first step, Send, described in how it works, and it saves a round of questions later.
The columns and where to find each answer
| Column | What to write | Where to find it |
|---|---|---|
| Device | What it is | Walk the house: garage, basement, utility room, driveway |
| Brand and model | Exact make and model | The label on the unit (side of the inverter, the battery enclosure, the charger, the water heater tank), the device information screen in its app, or the installer’s commissioning summary |
| Size or rating | The number that matters for scheduling | Solar system kW (your proposal), battery usable kWh and kW, charger amps and volts, the EV’s battery size (owner’s manual), water heater gallons and type, the heating system type and stages (thermostat settings menu) |
| Where it is | Room or wall | Useful for Wi-Fi signal and for anyone helping remotely |
| How you control it today | App, dial, schedule or nothing | Manufacturer app, vehicle app, a dial on the unit, a utility program device |
| Notes | Anything that changes the plan | In-service dates, reserve settings, departure times, program enrollment, known problems |
Add rows for anything else that uses a lot of energy or could move in time: a pool pump, a second car, a heat pump, a spare freezer, a generator, and the electrical panel itself (main breaker amps, and whether it is a smart panel). When the table is complete, download it as a CSV or print it.
Example (fictional). The worksheet opens with six rows for the fictional example home: a solar inverter for a 7.6 kW system on the garage wall, controlled through the manufacturer app and in service since April 2024; a home battery in the garage, 13.5 kWh usable and 5 kW, with its reserve set to 20%; an electric vehicle in the driveway, controlled from the vehicle app, that leaves at 7:30 a.m. on weekdays; a Level 2 charger in the garage at 30 amps and 240 volts, connected over Wi-Fi; a hallway thermostat for a two-stage heat pump; and a 50 gallon heat pump water heater in the basement, controlled by a dial on the unit, with a vacation mode. Replace every row with your own.
Why each column matters
Brand and model decide the control path. A schedule is only as good as its ability to reach each device. Depending on the model, that might be through a manufacturer’s cloud app, a local network interface or an open protocol, and some devices offer none of these. Device connection is confirmed home by home: during the Connect step, with your permission, Culni checks each device’s control path in your home, and anything that cannot connect is listed as manual, with the settings to enter by hand. The devices page explains the categories.
Size or rating sets the arithmetic. Battery kWh and kW decide how much of the peak it can cover; charger power decides how many hours the car needs (see the EV charging time calculator).
How you control it today shows who else is in charge. A thermostat or charger enrolled in a utility program, or a battery with settings locked by the installer, changes what any schedule can do.
Notes can change the rate math. In Kentucky, the solar in-service date decides the export credit: at LG&E and KU, systems first in service before September 24, 2021 are on NMS-1 (kWh credits), and later systems are on NMS-2 (a dollar credit per kWh).
What not to include
Do not write passwords, account logins or Wi-Fi keys in the worksheet or send them by email. Access to any device happens later, through the Connect step, with your permission. The worksheet itself stays in your browser until you download or print it.
What to do next
Gather the rate side with the utility bill checklist. The home energy plan page shows what Culni returns once it has both lists, including the device-by-device connection table. Installers documenting a system for a homeowner can see how Culni works with them on the installers page. When your list is ready, check my home and attach it.
TodayYour turn
Send your rate and your devices
Your utility and rate plan, one recent bill and the devices you have or plan. We reply with a written home energy plan: your rate decoded, which devices can connect, the daily schedule and its estimated value with every assumption shown.
Remote. No site visit needed.